GYEON Q²M Finish Polishing Pad (Rotary / Eccentric) 2 Stück

The last step to a flawless gloss – GYEON Q²M Finish polishing pad

What is the GYEON Q²M Finish polishing pad? The GYEON Q²M Finish polishing pad is a soft finishing pad for rotary and DA machines – built for the last polishing stage with finishing compounds, for maximum depth of gloss and a hologram-free surface ready for coatings.

The finish pad is what crowns every paint correction job. GYEON Q²M Finish polishing pad is built for the final polishing stage with Q²M Polish – a soft, fine foam cell structure that takes up finishing compounds and lays them down evenly on the paint. What you get is a hologram-free, high-gloss finish – the perfect base for a ceramic coating, or the end result of a full correction.

• Soft foam cell structure for gentle finishing without holograms. The Q²M Finish pad is the softest pad in the GYEON polishing system – made for the finishing phase, where you no longer want cut, just perfect spread and gloss build-up. That soft structure keeps holograms from forming on the finishing pass.
• Dialled in for GYEON Q²M Polish – the combo for deep gloss. Pad and polish are matched to each other: the Q²M Finish pad spreads the fine abrasives in Q²M Polish evenly and pulls the full gloss potential out of the finishing compound – maximum depth of gloss from the very last polishing step.
• Runs on both DA and rotary machines – versatile. The Q²M Finish pad works on either machine type. On a DA it gives you soft, streak-free results – ideal for the finishing pass on freshly corrected paint. On a rotary at low speed it also earns its keep on gloss-refining passes after the correction step.

Day-to-day from Detailing1: To get the best out of the Q²M Finish pad: mist the pad lightly (one spritz of water on the face) before you lay the compound down – that stops the compound drying into the pores. On a DA, work at medium speed (5–6) – too much speed on a soft finish pad kills the polishing load. When you are done, clean the pad straight away with a pad brush and water.

The GYEON polishing system: which pad for which step?

The GYEON Q²M polishing system is laid out clearly: heavy defect correction is the job of the Heavy Cut pad with Q²M Compound+. Medium correction goes to the Cut pad with Q²M Compound. The Polish pad with Q²M Polish handles fine correction and high-gloss build-up, and finally the Q²M Finish pad with Q²M Polish for the absolute finishing touch – hologram-free, deep gloss, coating-ready. Every pad has its clearly defined slot in the sequence.

Finishing: the step that makes the difference

Plenty of paint jobs stop after the correction step – the paint looks good, but not perfect. Finishing with a soft pad and a finishing compound takes the result to another level: the last fine holograms and buffer trails from the correction step go away, gloss gets pushed to the max, and the surface is prepped for a ceramic coating. With the Q²M Finish pad and Q²M Polish that step is easy to run and gives you consistently excellent results.

Pad care for a long service life

Polishing pads are an investment that will see out plenty of sessions if you look after them. Clean the Q²M Finish pad after every session with a pad brush under running water – flush the compound residue out of the pores. Let the pad air-dry lying flat – never squeeze it or store it squashed in a tight box. A clean, well-kept pad reliably beats an old, saturated one.

Buying advice: Q²M Finish pad for the perfect finish on your paint

The GYEON Q²M Finish polishing pad is the last link in a professional paint correction – and the one that decides the final impression. Skip the finish pad and you give away gloss and risk visible holograms under the coating. For a complete pad set we would go: Heavy Cut + Cut + Polish + Finish pad, paired with the full GYEON polishing kit of Q²M Compound+, Q²M Compound and Q²M Polish.