{"title":"Rotary Pads by GYEON","description":"\u003ch2\u003eMaximum Cutting Performance with GYEON Q²M Rotary Pads\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat are GYEON Rotary Pads? GYEON Q²M Rotary Pads are foam pads specifically developed for single rotary polishers, designed to effectively and precisely perform even severe paint corrections by specifically utilizing the higher speeds and stronger friction pressure of the rotary machine.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003e\u003cstrong\u003eGYEON Q²M Rotary Pads\u003c\/strong\u003e are the tool for demanding correction cases – where a dual-action machine reaches its limits. Due to its fixed axis of rotation, the rotary machine generates significantly more friction and heat than a DA machine. GYEON Rotary Pads are designed for these conditions: harder foam matrices prevent indentation at high speeds, special heat channels in the pad structure dissipate heat and protect the clear coat from overheating. The result is controlled, efficient cutting performance – even on heavily oxidized or scratched paint.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesigned for rotary machines and their specific loads.\u003c\/strong\u003e Thinner, softer DA pads would indent or work unevenly during rotation. GYEON Rotary Pads are designed in material thickness and foam density to remain stable and consistently powerful under rotary conditions – without vibration or padding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide cut depth coverage from compound to finish.\u003c\/strong\u003e Even with rotary pads, GYEON offers a complete gradation: from aggressive compounding pads to medium types and finishing variants that, despite the rotary principle, enable a hologram-free end result – provided the technique is correct.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat-resistant foam materials for continuous operation.\u003c\/strong\u003e In professional use, pads must work for several hours under load. GYEON Rotary Pads resist heat development in rotary machines without loss of shape or performance – this is not a nice-to-have in professional detailing, but a prerequisite.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e Rotary machines require more experience than DA polishers – especially with aggressive cut pads. Start with a low machine speed (1000–1500 RPM) and work your way up slowly. Always keep the machine moving – a stationary rotary pad can damage the paint within seconds due to overheating. GYEON Q²M Rotary Pads provide safety with the right technique – but do not replace practicing on test surfaces.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eRotary Machine vs. DA: When do you need Rotary Pads?\u003c\/h3\u003e\n\u003cp\u003eThe dual-action machine is sufficient for most correction cases in the hobby sector and for normal vehicle detailing. The rotary machine – and thus GYEON Rotary Pads – comes into play when the damage is deeper: heavily oxidized paint, deep single or spiderweb scratches, multiple paint layer damages, or vehicles with particularly hard clear coats. Also in commercial use, where speed is crucial, rotary is superior to DA. GYEON Rotary Pads ensure that the higher machine performance does not lead to uncontrolled cut depth, but can be precisely adjusted to the correction level.\u003c\/p\u003e\n\n\u003ch3\u003eApplication: Proper use and care of Rotary Pads\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Rotary Pads are attached to rotary polishers with a suitable backing plate (usually 80–150mm) using Velcro. Spread polish on the pad, not on the paint. Start the machine at a low setting first – this prevents splatters. Use even, overlapping movements with moderate pressure. Clean the pad regularly: a saturated rotary pad no longer transfers fresh abrasion, but smears old polish residue. After use, clean with warm water and mild shampoo, squeeze (do not wring), and let dry flat. This way, GYEON Rotary Pads will last for many uses.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Use: Which Rotary Pad for which Correction Need?\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Rotary Cut Pad is the tool of choice for severe oxidation damage, deep scratches, and for detailing vehicles that have not seen polish for years. The Medium Rotary Pad covers the normal correction range – swirls, medium holograms, transition polishing after the cut pass. The Finishing Rotary Pad completes the correction with maximum gloss – the combination of rotary energy and fine foam structure creates a high-quality finish even without the risk of holograms, provided sufficient polish and patience are used. Afterwards, ceramic coatings from the \u003ca href=\"\/en\/collections\/gyeon-quartz-beschichtungen\"\u003eGYEON Q² Coating range\u003c\/a\u003e are recommended.\u003c\/p\u003e\n\n\u003ch3\u003eGYEON Rotary Pads compared to other Rotary Pad manufacturers\u003c\/h3\u003e\n\u003cp\u003eRotary Pads from GYEON compete with established brands such as Rupes, Lake Country, or Koch-Chemie. The difference lies in system integration: GYEON has optimized its Rotary Pads to its own Q²M Compound and Polish formulations. This means that the abrasion behavior and heat development between the product and the pad are calibrated to each other. Other pads can be combined with GYEON polishes, but usually require more experience in finetuning. Those who use the GYEON system work with calculable parameters instead of trial-and-error.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase Recommendation: For Professionals and Ambitious Detailers\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Rotary Pads are recommended for anyone who already has experience with a rotary machine or plans to switch from DA to rotary. In professional use, several pads of each type should always be available to allow for uninterrupted changes. As a system addition, the \u003ca href=\"\/en\/collections\/gyeon-q2m-lackpolituren\"\u003eGYEON Q²M Paint Polishes\u003c\/a\u003e are recommended – especially Q²M Compound for the cut pass and Q²M Polish for the finishing step. For less aggressive corrections or for beginners, we recommend \u003ca href=\"\/en\/collections\/gyeon-q2m-exzenter-pads\"\u003eGYEON Eccentric Pads\u003c\/a\u003e for the DA machine.\u003c\/p\u003e","products":[{"product_id":"gyeon-q2m-rotary-eccentric-heavy-cut-polierpad","title":"Q²M Heavy Cut Polishing Pad (Rotary \/ Eccentric)","description":"\u003ch2\u003eMaximum Correction Power on the Polishing Pad – GYEON Q²M Heavy Cut Polishing Pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the GYEON Q²M Heavy Cut Polishing Pad? The GYEON Q²M Heavy Cut Polishing Pad is a hard correction polishing pad for rotary and eccentric machines – designed for aggressive defect correction with Q²M Compound+ or other heavy-cut compounds for maximum cutting performance.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eWhen deep scratches, extreme swirls, or heavily oxidized paint need correction, the right pad is just as crucial as the compound. The \u003cstrong\u003eGYEON Q²M Heavy Cut Polishing Pad\u003c\/strong\u003e is the most aggressive foam pad in the GYEON polishing system – with a hard foam cell structure that extracts maximum cutting performance from the compound and delivers impressive correction results even on hard paints or extreme defects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard foam cell structure for maximum compound activation.\u003c\/strong\u003e The hardness of the pad largely determines how aggressively the abrasives in the compound act on the paint. The Heavy Cut Pad transfers maximum pressure to the paint surface and fully activates the abrasive particles – for the highest correction performance in the foam pad range.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast compound release for efficient work.\u003c\/strong\u003e The Q²M Heavy Cut Pad quickly absorbs compound and releases it evenly onto the paint surface. The open-cell structure prevents the compound from drying out too quickly in the pad and ensures consistent cutting performance throughout the entire polishing process.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCan be used with rotary and eccentric machines.\u003c\/strong\u003e The Q²M Heavy Cut Pad can be used on both machine types – on a rotary machine, it delivers maximum cutting performance for extreme defects, while on an eccentric machine, it offers high corrective power with safer handling for less experienced users.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Always start with the Q²M Heavy Cut Pad on a test spot in an inconspicuous area – especially on soft paints (many import vehicles). Overly aggressive polishing with the Heavy Cut Pad can remove too much paint. On an eccentric machine, work at levels 6–8; on a rotary machine, at 1000–1500 rpm. After the correction step with Q²M Compound+, it is essential to finish with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e and a soft pad.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eHeavy Cut Pad in Professional Application: When it's Needed\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Heavy Cut Pad is used when: deep scratches and scratches that cannot be fully corrected with a medium compound are present, when the paint is heavily oxidized and dull (vehicles that have been neglected for years without care), when stubborn holograms from poor previous polishing need to be removed, or when very hard paints (e.g., some BMW or Ferrari paints) require more aggressive correction. Heavy Cut Pad + \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e is the combination for maximum correction power – with the understanding that finishing with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e + soft pad must always follow.\u003c\/p\u003e\n\n\u003ch3\u003ePad Sequence for Complete Paint Preparation\u003c\/h3\u003e\n\u003cp\u003eFor complete paint preparation on heavily defective paint, we recommend a three-step pad sequence: Heavy Cut Pad + \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e for coarse correction, \u003ca href=\"\/en\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut Pad\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e for fine correction and reduction of Compound+ holograms, \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish Pad\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for the final high gloss. Before coating: \u003ca href=\"\/en\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e as the final IPA wiping.\u003c\/p\u003e\n\n\u003ch3\u003ePad Care for the Heavy Cut Pad\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Heavy Cut Pad is a robust tool that, with proper care, can withstand many uses. After each polishing session, clean the pad with a pad washing brush under running water – thoroughly rinse out compound residues. Allow the pad to dry flat. Heavy Cut Pads typically have a longer lifespan than softer pads because the harder structure compresses less quickly. Nevertheless: if the pad no longer polishes evenly or shows signs of detachment, replace it.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase Recommendation: Q²M Heavy Cut Pad for Serious Paint Correction\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M Heavy Cut Polishing Pad is the tool of choice for ambitious detailers and professionals who correct extreme defects or heavily neglected paints. For a complete polishing pad set, we recommend: Q²M Heavy Cut + \u003ca href=\"\/en\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish\u003c\/a\u003e Pad, combined with the GYEON polishing kit of \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e, \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e, and \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for maximum results.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335256088911,"sku":"D1-GYEON-Q2MRHC80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 145 mm (1 piece)","offer_id":57335260021071,"sku":"D1-GYEON-Q2MRHC145","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 80 mm (2 pieces)","offer_id":57337502204239,"sku":"D1-GYEON-Q2MEHC80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 145 mm (1 piece)","offer_id":57337502237007,"sku":"D1-GYEON-Q2MEHC146","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-heavy-cut-polierpad.png?v=1774633860"},{"product_id":"gyeon-q2m-cut-rotary-eccentric-polierpad","title":"Q²M Cut Polishing Pad (Rotary \/ Eccentric)","description":"\u003ch2\u003eDefect Correction with Precision – GYEON Q²M Cut Polishing Pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the GYEON Q²M Cut Polishing Pad? The GYEON Q²M Cut Polishing Pad is a medium-hard polishing pad for rotary and eccentric machines – developed for correction polishing with medium-cut compounds, with optimal abrasive absorption and controlled heat development for precise work.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe right polishing pad is just as crucial for the polishing result as the polish itself. The \u003cstrong\u003eGYEON Q²M Cut Polishing Pad\u003c\/strong\u003e is designed for the correction phase of paint polishing – for use with \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e (Medium Cut) on eccentric and rotary machines. The medium-hard foam cell offers the right balance between abrasive absorption, heat development, and cutting performance for controlled, reproducible defect correction.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedium-hard foam cell for optimal compound absorption and release.\u003c\/strong\u003e The foam cell structure of the Q²M Cut Pad is optimized for use with medium-cut compounds like Q²M Compound – the pad absorbs the compound evenly and releases it in a controlled manner onto the paint surface for a consistent polishing result.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eControlled heat development prevents paint overheating.\u003c\/strong\u003e Too much heat during polishing can damage paint – especially soft paints or wraps. The Q²M Cut Pad is designed to keep heat development within a safe range, even with more aggressive machine settings.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEqually suitable for eccentric and rotary machines.\u003c\/strong\u003e The Q²M Cut Polishing Pad can be used on both machine types – on the eccentric for safer, more forgiving polishing, and on the rotary for higher cutting performance. The dimensional stability of the pad ensures consistent results on both machine types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e Before the first use, work a small amount of compound into the Q²M Cut Pad (distribute 3–4 drops on the pad and run it on a piece of cardboard without pressure). This loads the pad evenly with compound and prevents an uneven first polishing pass. Clean the pad regularly with a pad cleaning brush – a clogged pad significantly loses its cutting performance.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePad Selection in the GYEON Polishing System: Which Pad for Which Task?\u003c\/h3\u003e\n\u003cp\u003eGYEON offers a coordinated polishing pad system. The \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy-Cut Pad\u003c\/a\u003e for severe defects with Compound+, the Q²M Cut Pad for medium defects with Q²M Compound, the \u003ca href=\"\/en\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish Pad\u003c\/a\u003e for fine correction, and the \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish Pad\u003c\/a\u003e for finalization and coating preparation. In addition, there are the wool pads for rotary machines (\u003ca href=\"\/en\/products\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss\"\u003eHeavy Cut\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau\"\u003eCut\u003c\/a\u003e) as an alternative for maximum cutting performance.\u003c\/p\u003e\n\n\u003ch3\u003ePad Care and Lifespan\u003c\/h3\u003e\n\u003cp\u003ePolishing pads are wear parts, but with proper care, they last significantly longer. After each polishing session, clean the pad with a pad cleaning brush or a pad washer – compound residues in the pad reduce cutting performance and can cause scratches. The Q²M Cut Pad can be gently cleaned with water and mild soap and reused after drying. A new, clean pad always delivers better results than an old, oversaturated one.\u003c\/p\u003e\n\n\u003ch3\u003eCombination Recommendation: Q²M Cut Pad and Compound\u003c\/h3\u003e\n\u003cp\u003eThe optimal combination for medium defect correction: Q²M Cut Pad + \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e on an eccentric polisher (speed 5–7) or a rotary polisher (1200–1500 RPM). This combination eliminates everyday swirls, wash scratches, and light holograms in one pass. For subsequent finishing: \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eQ²M Finish Pad\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for the final deep gloss. The coordinated system consistently delivers professional results.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Cut Pad on Different Vehicle Types\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Cut Pad is suitable for all vehicle paints – from soft import paints to hard German premium paints. For soft paints: lower machine speed and less pressure. For hard paints: higher speed and the pad can be subjected to more stress. For very soft paints or high ambient temperatures, regularly check if the paint is overheating. The pad itself is robust and durable.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase Recommendation: The Q²M Cut Pad for Correction Polishing\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M Cut Polishing Pad is the ideal companion for the correction step in any professional paint preparation. For beginners, use on an eccentric polisher is recommended – safe, forgiving, and effective. For a complete polishing package: \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy-Cut Pad\u003c\/a\u003e + Q²M Cut Pad + \u003ca href=\"\/en\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish Pad\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish Pad\u003c\/a\u003e – along with \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e, \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e, and \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335257596239,"sku":"D1-GYEON-Q2MRC80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 145 mm (1 piece)","offer_id":57335260938575,"sku":"D1-GYEON-Q2MRC145","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 80 mm (2 pieces)","offer_id":57337615843663,"sku":"D1-GYEON-Q2MEC80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 145 mm (1 piece)","offer_id":57337615876431,"sku":"D1-GYEON-Q2MEC145","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-cut-rotary-eccentric-polierpad.png?v=1774636477"},{"product_id":"gyeon-q2m-polish-rotary-eccentric-polierpad","title":"Q²M Polish Polishing Pad (Rotary \/ Eccentric)","description":"\u003ch2\u003eFine Correction and Gloss Enhancement in One Pad – GYEON Q²M Polish Polishing Pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Polish Polishing Pad? GYEON Q²M Polish Polishing Pad is a soft to medium polishing pad for rotary and eccentric machines – developed for fine correction and gloss optimization with Q²M Polish, between the correction step and the final finishing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe Q²M Polish Polishing Pad holds the position between correction and finishing in the GYEON polishing system – it is softer than the \u003ca href=\"\/en\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut Pad\u003c\/a\u003e, but still a bit more intense than the \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish Pad\u003c\/a\u003e. The ideal combination with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e results in a polishing step that provides fine correction (light compound holograms) and high gloss development simultaneously.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSoft to medium foam cell design for fine correction and gloss.\u003c\/strong\u003e The Q²M Polish Pad is harder than a pure finishing pad, but softer than a correction pad – just the right hardness for the fine correction phase, in which subtle compound holograms are eliminated and maximum gloss is developed simultaneously.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimized for Q²M Polish – perfect compound delivery.\u003c\/strong\u003e The foam cell structure of the Polish Pad is matched to the fineness of the Q²M Polish abrasive particles: Uniform absorption and delivery of the fine polish for a consistent, streak-free result across the entire panel surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuitable for rotary and eccentric machines.\u003c\/strong\u003e The Q²M Polish Pad can be used on both machine types – on the eccentric for safe, forgiving finishing, on the rotary at low speed for intensive gloss development on large areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Use the Q²M Polish Pad best at medium machine speed (eccentric level 5–6, rotary 1000–1200 rpm). Perform the last polishing pass on each panel slowly and overlapping – this prevents streaks. After the polishing step, check the result under halogen light or LED work lamp: Fine holograms are harder to detect under direct sunlight than under artificial angled light.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe Q²M Polish Pad in the three-step polish\u003c\/h3\u003e\n\u003cp\u003eIn the three-step polish, the Polish Pad takes the middle position: \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy-Cut Pad\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e for severe defects → Q²M Polish Pad + \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for fine correction and initial gloss development → \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish Pad\u003c\/a\u003e + Q²M Polish for absolute finalization. The Polish Pad reduces the Compound+ holograms and already takes over the largest part of the gloss development – the final finish step is then only a short, but important fine-tuning.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Polish Pad for one-step polishing\u003c\/h3\u003e\n\u003cp\u003eOn vehicles with light to medium defect levels, the Polish Pad + Q²M Polish can be used as the sole polishing product in a one-step polish. The Polish Pad has enough corrective power for fine swirls and wash scratches and at the same time enough softness for a high degree of gloss without holograms. This combination is ideal for annual refresh polishes on well-maintained vehicles – no compound needed, minimal paint removal, optimal results.\u003c\/p\u003e\n\n\u003ch3\u003ePad care and durability\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Polish Pad is a durable tool with proper care. After each polishing unit, clean it with a pad washing brush under running water. The finer foam structure of the Polish Pad (softer than Heavy-Cut or Cut) is more sensitive to excessive stress – when using the machine heavily, switch to harder pads to protect the Polish Pad. Dry flat, do not store compressed.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase recommendation: The complete GYEON polishing pad system\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Polish Polishing Pad is an integral part of the complete GYEON polishing system. As a complete set: \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy-Cut Pad\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut Pad\u003c\/a\u003e + Q²M Polish Pad + \u003ca href=\"\/en\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish Pad\u003c\/a\u003e – for all four polishing stages. Combined with the lamb wool pads (\u003ca href=\"\/en\/products\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss\"\u003eRotary Wool Heavy Cut\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau\"\u003eRotary Wool Cut\u003c\/a\u003e) for the rotary machine, this results in the most complete polishing pad system for professional paint preparation.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335258677583,"sku":"D1-GYEON-Q2MRP80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 145 mm (1 piece)","offer_id":57335260971343,"sku":"D1-GYEON-Q2MRP145","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 80 mm (2 pieces)","offer_id":57337723191631,"sku":"D1-GYEON-Q2MEP80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 145 mm (1 piece)","offer_id":57337723224399,"sku":"D1-GYEON-Q2MEP145","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-polish-polierpad.png?v=1774638526"},{"product_id":"gyeon-q2m-finish-rotary-eccentric-polierpad","title":"Q²M Finish Polishing Pad (Rotary \/ Eccentric)","description":"\u003ch2\u003eThe Last Step to Perfect Shine – GYEON Q²M Finish Polishing Pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Finish Polishing Pad? GYEON Q²M Finish Polishing Pad is a soft finishing pad for rotary and eccentric machines – designed for the final polishing stage with finishing compounds, for maximum deep gloss and a hologram-free surface in preparation for coatings.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe finish pad is the crowning glory of any paint polishing work. \u003cstrong\u003eGYEON Q²M Finish Polishing Pad\u003c\/strong\u003e is designed for the final polishing stage with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e – with a soft, fine foam cell structure that optimally absorbs finishing compounds and applies them evenly to the paint. The result is a hologram-free, high-gloss paint surface – the perfect base for a ceramic coating or the final result of a complete polish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSoft foam cell structure for gentle finishing without holograms.\u003c\/strong\u003e The Q²M Finish Pad is the softest pad in the GYEON polishing system – designed for the finishing phase, where abrasiveness is no longer required, but only perfect distribution and optimal gloss development. The soft structure prevents hologram formation during the finishing step.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimized for GYEON Q²M Polish – perfect combination for deep gloss.\u003c\/strong\u003e Pad and polish are coordinated: The Q²M Finish Pad optimally distributes the fine abrasive particles of Q²M Polish and utilizes the full gloss-developing power of the finishing compound – for maximum deep gloss from the last polishing step.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuitable for eccentric and rotary machines – versatile.\u003c\/strong\u003e The Q²M Finish Pad can be used on both machine types. On the eccentric, it delivers gentle, streak-free results – ideal for the finishing step on freshly polished paint surfaces. On the rotary at low speed, it is also suitable for gloss optimization passes after the correction step.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e For optimal results with the Q²M Finish Pad: slightly moisten the pad (one spray of water on the cutting surface) before applying the compound – this prevents the compound from drying out in the pores. On the eccentric, work at a medium setting (5–6) – too high a speed on a soft finish pad can reduce the polishing load. After work, clean the pad immediately with a pad washing brush and water.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe GYEON Polishing System: Which pad for which step?\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M polishing system is clearly structured: For the heaviest defect correction, the \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy-Cut Pad\u003c\/a\u003e with \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e is used. For medium correction, the \u003ca href=\"\/en\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut Pad\u003c\/a\u003e with \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e follows. The \u003ca href=\"\/en\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish Pad\u003c\/a\u003e with Q²M Polish is used for fine correction and high gloss development, and finally the Q²M Finish Pad with Q²M Polish for absolute finishing – hologram-free, deep gloss, coating-ready. Each pad has its clearly defined place in the sequence.\u003c\/p\u003e\n\n\u003ch3\u003eFinishing: The step that makes the difference\u003c\/h3\u003e\n\u003cp\u003eMany paint polishes end after the correction step – the paint looks good, but not perfect. Finishing with a soft pad and a finishing compound takes the result to another level: the last fine holograms and swirl marks from the correction step are eliminated, the gloss level is maximized, and the surface is prepared for a ceramic coating. With the Q²M Finish Pad and \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e, this step is easy to perform and delivers consistently excellent results.\u003c\/p\u003e\n\n\u003ch3\u003ePad care for maximum lifespan\u003c\/h3\u003e\n\u003cp\u003ePolishing pads are investments that, with care, will last through many polishing sessions. Clean the Q²M Finish Pad after each session with a pad washing brush under running water – rinse compound residues out of the pores. Let the pad air dry flat – never squeeze it or store it in tight containers. A clean, well-maintained pad reliably delivers better results than an old, oversaturated one.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase Recommendation: Q²M Finish Pad for the perfect paint finish\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M Finish Polishing Pad is the last link in a professional paint polish – and the most important for the final impression. Those who forego the finish pad lose gloss and risk visible holograms after coating. For a complete polishing pad set, we recommend: \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy-Cut\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish\u003c\/a\u003e + Finish Pad, combined with the complete GYEON polishing kit of \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e, \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335258841423,"sku":"D1-GYEON-Q2MRF80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 145 mm (1 piece)","offer_id":57335261004111,"sku":"D1-GYEON-Q2MRF145","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 80 mm (2 pieces)","offer_id":57337737412943,"sku":"D1-GYEON-Q2MEF80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 145 mm (1 piece)","offer_id":57337737445711,"sku":"D1-GYEON-Q2MEF145","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-finish-polierpad.png?v=1774638886"},{"product_id":"gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss","title":"Q²M Rotary Wool Heavy Cut Polishing Pad \/ Lambswool (White)","description":"\u003ch2\u003eMaximum Removal for the Toughest Cases – GYEON Q²M Rotary Wool Heavy Cut Polishing Pad White\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eWhen do I need a Heavy-Cut Pad and when is a normal Cut Pad sufficient?\u003c\/strong\u003e\u003cbr\u003e\nThe regular Cut Pad works efficiently on medium to heavy defects – holograms, swirls, superficial scratches. The Heavy-Cut Pad, like the GYEON Q²M Rotary Wool Heavy Cut in white, is reserved for the toughest cases: deeply ingrained scratches, severe oxidation, stubborn water spots in the paint, and vehicles that have been driven for years without maintenance. Maximum removal is required here – and that's exactly what the Heavy-Cut Pad delivers.\n\u003c\/blockquote\u003e\n\n\u003cp\u003eThere are vehicles where normal correction capabilities are simply not enough. Paints that have oxidized under the sun for years. Deep scratches from car washes. Ingrained water spots that have structurally altered the paint surface. The GYEON Q²M Rotary Wool Heavy Cut Polishing Pad in white is made for these extreme cases: the most aggressive pad in the GYEON line, optimized for maximum removal in rotary operation. The pad for professionals who don't get a second chance.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Power:\u003c\/strong\u003e The Heavy-Cut Pad delivers the highest removal in the GYEON pad line – for defects that would require too many passes with normal cut pads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick Lambswool Fibers for Deep Penetration:\u003c\/strong\u003e The longer, denser wool fibers penetrate deeper into the paint surface, allowing for efficient removal of even deep-seated defects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotary-Optimized Construction:\u003c\/strong\u003e Designed for high rotation speeds and the higher energy input of rotary machines – maximum performance without uncontrolled heat input.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eDaniel's Practical Tip:\u003c\/strong\u003e The Heavy-Cut Pad is a professional tool and demands respect. Always start with a test area to find the right compound-pad combination and machine setting. Too much pressure or too high a speed can damage even hard paint. After the heavy-cut step, plan at least two finishing stages: once with the \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau\"\u003eQ²M Rotary Wool Cut gray\u003c\/a\u003e for the intermediate finishing phase, then a fine finishing pad for a high gloss.\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eAreas of Application: These Defects Require Heavy Cut\u003c\/h3\u003e\n\u003cp\u003eHeavy-Cut Pads are reserved for extreme cases – for everyday detailing, a regular Cut Pad is sufficient. Typical heavy-cut situations: vehicles with neglected paint after several years without professional detailing, vehicles with deep car wash holograms that normal compound pads cannot completely remove, or heavily oxidized metallic paints that would otherwise be beyond saving without aggressive removal.\u003c\/p\u003e\n\u003cp\u003eA heavy-cut step is also often needed when preparing vehicles for wraps or paint protection film (PPF) to eliminate defects before the film is applied. Defects under PPF cannot be corrected after application – here, a complete heavy-cut step is not a matter of perfectionism, but of professional diligence.\u003c\/p\u003e\n\n\u003ch3\u003eThe Right Combination: Pad, Polish and Machine\u003c\/h3\u003e\n\u003cp\u003eThe Heavy-Cut Pad unleashes its full potential with a highly abrasive compound and a powerful rotary. Not every polish is suitable for this application – the compound must contain sufficient abrasives that harmonize with the fiber structure of the lambswool pad. Polishes that are too fine on the Heavy-Cut Pad lead to overheating and uneven removal.\u003c\/p\u003e\n\u003cp\u003eThe machine setting plays an equally decisive role. With the Rotary Wool Heavy Cut, do not immediately go to maximum speed – first work the pad and polish at medium speed, then gradually increase. Constant movement, even pressure, no standstill on one point. This way you avoid hot spots that can permanently damage the paint.\u003c\/p\u003e\n\n\u003ch3\u003eWorkflow After Heavy Cut\u003c\/h3\u003e\n\u003cp\u003eThe heavy-cut step is always only the first in a multi-stage polishing sequence. The remaining working marks of the Wool Heavy Cut – fine, circular sanding marks – must be removed in further steps. Typically: after the heavy cut with the \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau\"\u003eGYEON Q²M Rotary Wool Cut gray\u003c\/a\u003e and a medium polish to eliminate the roughest working marks, then create a high gloss with a finishing pad and a final polish.\u003c\/p\u003e\n\u003cp\u003eAfter this three-stage process, the paint is ready for sealing. Depending on the vehicle and customer requirements, a carnauba wax, a simple sealant, or a professional ceramic coating follows. If you are looking for a quick, reliable single-layer sealant, the \u003ca href=\"\/en\/products\/gyeon-q2m-wetcoat-nassversiegelung\"\u003eGYEON Q²M WetCoat\u003c\/a\u003e is an excellent option directly after the last wash.\u003c\/p\u003e\n\n\u003ch3\u003ePad Care and Durability\u003c\/h3\u003e\n\u003cp\u003eLambswool pads are more robust than foam pads, but also more demanding in care. After each use, immediately clean the pad of polish residues with a pad washer – hardened compound residues destroy the fiber structure and permanently reduce cutting performance. After the session, wash in clear water or with pad wash, squeeze out (do not wring), and air dry flat or hanging.\u003c\/p\u003e\n\u003cp\u003eWith regular and careful care, a high-quality lambswool pad like the Q²M Rotary Wool Heavy Cut is designed for many uses. The investment thus pays for itself significantly faster than with cheaper pads that lose their cutting performance after a few uses.\u003c\/p\u003e\n\n\u003ch3\u003eWho should use the Heavy-Cut Pad?\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Rotary Wool Heavy Cut is clearly a professional tool. Anyone with no experience with rotary machines should not start with the most aggressive pad – the risk of overheating and paint damage is real. For experienced detailers and professionals, however, it is an indispensable tool for cases where everything else is not enough.\u003c\/p\u003e\n\u003cp\u003eIn professional operations, heavy-cut pads are standard equipment. Anyone who regularly details heavily neglected vehicles, for dealers, leasing companies, or private customer restorations, needs this tool. Combined with the appropriate compound and a powerful rotary machine, the GYEON Q²M Rotary Wool Heavy Cut delivers results that cannot be achieved with any other pad with this efficiency.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335259038031,"sku":"D1-GYEON-Q2MRWHC80","price":19.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 130 mm (1 piece)","offer_id":57335261102415,"sku":"D1-GYEON-Q2MRWHC130","price":24.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss.png?v=1774632482"},{"product_id":"gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau","title":"Q²M Rotary Wool Cut Polishing Pad \/ Lambswool (Grey)","description":"\u003ch2\u003eLambswool Power for Rotary – GYEON Q²M Rotary Wool Cut Polishing Pad Gray\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eWhat is the difference between a lambswool polishing pad and a foam polishing pad?\u003c\/strong\u003e\u003cbr\u003e\nFoam pads work with even pressure and are easy to control – but they reach their limits with deep scratches and severe holograms. Lambswool polishing pads like the GYEON Q²M Rotary Wool Cut cut more aggressively because the natural fibers, with their three-dimensional structure, transfer more mechanical energy to the paint surface. The result: significantly faster defect removal for challenging defects – suitable for rotary machines that can also deliver this power.\n\u003c\/blockquote\u003e\n\n\u003cp\u003eSevere paint defects – deep scratches, stubborn holograms, oxidized paint, or the proverbial spiderweb effect on neglected vehicles – require real cutting power, not half-hearted polishing. The GYEON Q²M Rotary Wool Cut Polishing Pad in Gray is designed for precisely these situations: a lambswool pad for rotary operation that efficiently removes deep defects with high aggressiveness. The choice for professionals who know that true correction doesn't come without true work.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Cutting Performance through Natural Fiber:\u003c\/strong\u003e The lambswool fibers mechanically engage with the paint surface and efficiently remove defects – more removal per minute than with comparable foam pads of the same grade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized for Rotary Machines:\u003c\/strong\u003e The pad is designed for the higher rotational speeds and linear energy input of rotary polishing machines – this maximizes cutting performance and minimizes unnecessary heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable and Reusable:\u003c\/strong\u003e When properly cared for, lambswool pads are significantly more durable than highly aggressive foam pads – the fibers regenerate after cleaning and maintain their cutting performance over many uses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003ePractical tip from Daniel:\u003c\/strong\u003e Do not start the Rotary Wool Cut at too high an RPM – begin at a medium RPM (1200–1500 rpm) to break in the polishing pad and distribute the polish. At maximum RPM without sufficient polish, you risk uneven removal and hot spots. After use, thoroughly wash out the pad with a pad washer or under running water and hang it to dry – this preserves the fiber structure.\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eRotary vs. DA: When do I need the Rotary Wool Cut?\u003c\/h3\u003e\n\u003cp\u003eDual-action machines are the daily tool for most detailers – safe, forgiving, and with good pads also suitable for medium corrections. However, for severe holograms, oxidation, or deep defects on hard paints, DA machines reach their limits. This is where the rotary comes into play: continuous rotation delivers more mechanical energy, and the lambswool pad efficiently transfers this energy to the surface.\u003c\/p\u003e\n\u003cp\u003eThe Q²M Rotary Wool Cut in Gray is the more aggressive counterpart to the white Heavy-Cut pad – designed for control-cut tasks where controlled removal is required. For maximum removal, the \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss\"\u003eGYEON Q²M Rotary Wool Heavy Cut\u003c\/a\u003e in white is available. After the correction phase with the Rotary Wool Cut, a finishing polish with a less aggressive pad typically follows to completely remove the working marks.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable Polishes for the Rotary Wool Cut\u003c\/h3\u003e\n\u003cp\u003eThe choice of the right polish is crucial for the result. With the Rotary Wool Cut, highly abrasive compounds can be used efficiently – the pad accelerates the removal process and reduces the number of passes required. The polish should contain sufficient abrasives to work harmoniously with the pad. Polishes that are too fine on an aggressive lambswool pad can lead to overheating and uneven removal.\u003c\/p\u003e\n\u003cp\u003eAfter the correction phase, always follow up with a finishing pad and a finishing polish to completely eliminate the fine working marks created by aggressive cutting. The goal is always a hologram- and scratch-free, deep-gloss paint ready for final sealing.\u003c\/p\u003e\n\n\u003ch3\u003ePad Care for Maximum Lifespan\u003c\/h3\u003e\n\u003cp\u003eLambswool pads are an investment that pays off in the long run with proper care. After each use, the pad should be thoroughly cleaned – ideally with a pad washer during polishing and after the session under running water or in a bucket with pad wash solution. The fibers must be completely freed of polish residues, which otherwise clump and permanently reduce cutting performance.\u003c\/p\u003e\n\u003cp\u003eAfter washing, air dry the pad – never in a tumble dryer, as heat destroys the fiber structure. Store dry and dust-free, ideally in a protective cover. A well-maintained lambswool pad can withstand dozens of uses while delivering consistent cutting performance.\u003c\/p\u003e\n\n\u003ch3\u003eCut Pad in the Correction Workflow\u003c\/h3\u003e\n\u003cp\u003eThe typical workflow with the Q²M Rotary Wool Cut: assess paint condition, set machine settings (RPM, pressure, speed), work a test area with the pad and a suitable compound, check the result. Only then work the entire surface. Always proceed panel by panel, not the entire area at once.\u003c\/p\u003e\n\u003cp\u003eAfter the Rotary Wool Cut, the finishing phase follows – here, a finishing pad and a final polish are suitable to eliminate the working marks of the Wool Cut and bring the paint to a high gloss. Finally, the vehicle should be sealed with a coating or wax. The \u003ca href=\"\/en\/products\/gyeon-q2m-wetcoat-nassversiegelung\"\u003eGYEON Q²M WetCoat\u003c\/a\u003e offers a quick sealing option directly after the last wash.\u003c\/p\u003e\n\n\u003ch3\u003eWho is the Q²M Rotary Wool Cut the right choice for?\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Rotary Wool Cut is aimed at experienced detailers and professionals who work with rotaries and are looking for a reliable, high-performance lambswool pad for correction tasks. For beginners and DA users, we recommend starting with foam pads and a DA machine – rotary operation with lambswool requires experience and a feel for machine pressure and heat development.\u003c\/p\u003e\n\u003cp\u003eAnyone who regularly corrects heavily used vehicles – from fleet vehicles, lease returns, or vehicles with neglected paint care – will appreciate the Q²M Rotary Wool Cut as an indispensable tool in their pad selection.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335259103567,"sku":"D1-GYEON-Q2MRWC80","price":19.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 130 mm (1 piece)","offer_id":57335261167951,"sku":"D1-GYEON-Q2MRWC130","price":24.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau.png?v=1774632020"}],"url":"https:\/\/detailing1.fr\/en\/collections\/gyeon-q2m-polishing-rotary-pads.oembed","provider":"Detailing1","version":"1.0","type":"link"}